Lightweight Mitsubishi Replacement Parts 6d31 Cylinder Liner Simple Structure

Lightweight Mitsubishi Replacement Parts 6d31 Cylinder Liner Simple Structure

OKJ Parts 6D31 Cylinder Liner for Mitsubishi Engine Agriculture Diesel Engine Spare Parts

Cylinder liner is divided into dry cylinder liner and wet cylinder liner two categories.

The cylinder liner that does not contact cooling water on the back is called a dry cylinder liner, while the cylinder liner that does contact cooling water on the back is a wet cylinder liner.

Dry cylinder liner thickness is thinner, simple structure, convenient processing. The wet cylinder liner is in direct contact with the cooling water,

so it is beneficial to the cooling of the engine and the small lightweight of the engine.

Product Description

Common problems

insufficient running-in:

In order to achieve effective running-in in as short a time as possible, running-in time and load distribution must be taken into consideration. Under too low load, running-in cannot be completed even if it takes a long time, while if the engine is anxious to run under high load, it will cause the cylinder to be drawn.

The piston ring shall be operated under low load for a period of time after replacement. After replacing the piston and cylinder jacket, it should be run in and out before increasing the load.

poor cooling:

Poor cooling will lead to high cylinder and piston temperature, poor lubrication; Poor cooling will cause the piston and cylinder liner to overheat and overexpand and deform, losing the original normal clearance and pulling the cylinder.

Corrosion or fouling of cooling water chamber; There are bubbles in the water, which accumulate in the cooling chamber and do not release, causing air resistance. The water is too dirty and too hot.

.

Our Advantages
1. Technical experts take in charge of making drawing for the sample offered by clients.

2. Experience in engine parts for over 15 years and served customers all around the world.

3. We have the professional equipment for inspection and measurement. Each piece should be strictly tested.

4. We have our own factory to provide you the competitive price with a good quality.

FAQ

Q1: Can we print our company logo on product and package?

A1: Yes, but the quantity of the order is required. And we need you to offer the Trademark Authorization to us.

Q2: How do you control the quality of the products?

A2: We have the professional measurement and inspection equipment.Every process of the production is strictly controlled. And all products will be inspected by QC before shipment.

Q3: What is your MOQ?

A3: We do not have MOQ . We accept lower quantity for your trial order.

Our Product Range